大同大學 教職員資料 (Information of TTU Faculty & Staff)
 
基本資料 (Basic Info)
姓名:楊木榮 (Yang, Mu-Rong) 教授
單位:材料工程學系  
電話:02-77364659  
手機:0936676693  
email:mryang@ttu.edu.tw  
網址:  
 
學歷 (Education)
台灣大學 材料工程 博士 (1997/9 ~ 2000/6)
台灣大學 材料工程 碩士 (1987/9 ~ 1989/6)
大同工學院 材料工程 學士 (1983/9 ~ 1987/6)
 
經歷 (Experience)
大同大學 材料系 教授 (2009/1 ~ 今)
大同大學 材料系 副教授 (2000/7 ~ 2009/1)
大同大學 圖書館 館長 (2002/8 ~ 2006/7)
大同大學 材料系 講師 (1991/7 ~ 1998/6)
 
專長 (Specialty)
電化學 Electrochemistry
電漿技術 Plasma technology
 
獎勵 (Award)
2009年輕金屬創新應用設計競賽_學生組第二名 (經濟部工業局 2009-11-30)
 
服務 (Service)
中華民國熱浸鍍鋅協會理事 (2014-04-01 ~ 今)
育成中心_台灣表面處理科技有限公司顧問 (2010-04-01 ~ 今)
台灣區表面處理工業同業公會顧問 (2009-09-01 ~ 今)
大同公司新事業育成處技術顧問 (2005-08-01 ~ 2008-07-31)
大同公司新事業育成處技術顧問 (2005-08-01 ~ 2008-07-31)
 
研究計畫 (Project)
微弧氧化鍍膜的負電流製程參數對成長機制影響之研究
國科會 101-2221-E-036-017- 執行期間:2012-08-01 ~ 2013-07-31
利用線性增電壓微弧氧化技術於純鈦上沉積含鈣磷化合物之研究
國科會 NSC 100-2221-E-036 -012 - 執行期間:2011-08-01 ~ 2012-07-31
7075-T6鋁合金微弧氧化表面處理之黑化、耐疲勞和耐磨耗研究
國科會 NSC 99-2221-E-036 -003 執行期間:2010-08-01 ~ 2011-07-31
高速連接元件與系統之測量模擬分析與製造技術之研發-子計畫三:連接器接腳電鍍技術之測試與分析及開發
矽瑪科技股份有限公司 E9906-T17-063 執行期間:2010-06-01 ~ 2013-05-31
平面顯示器設備自製率躍升計畫-矽薄膜太陽能電池次能間隙特徵檢定之儀器架設
財團法人金屬工業研究發展中心 E9904-T13-051 執行期間:2010-03-01 ~ 2011-10-31
鋁合金表面被覆層技術
寶緯工業股份有限公司 E9807-T22-086 執行期間:2009-12-01 ~ 2011-12-31
運動器材之超高強度鋁合金表面處理技術開發計畫
經濟部技術處 PT098130228 執行期間:2009-11-01 ~ 2010-04-30
鈦合金脈衝陽極處理的脈波時脈對抗蝕性的影響
大同大學 B98-T06-028 執行期間:2009-09-01 ~ 2010-07-31
7075-T6鋁合金微弧氧化表面處理之研究
國科會 NSC 98-2221-E-036-008 執行期間:2009-08-01 ~ 2010-07-31
輕量化鋁合金刀具研究計畫
經濟部技術處 PT097130718 執行期間:2009-04-01 ~ 2010-09-30
鋁合金硬陽處理的前處理工程改善計畫
榮盈工業股份有公司 E9801-T10-051 執行期間:2009-01-15 ~ 2009-05-31
AZ31 鎂合金脈衝陽極處理的脈波時脈對抗蝕性的影響
大同大學 B97-T09-009 執行期間:2008-09-01 ~ 2009-07-31
AZ系鎂合金的脈衝陽極處理
大同大學 B96-T03-067 執行期間:2007-09-01 ~ 2008-08-31
利用共沉法合成磷酸鋰鐵/磷酸鋰釩複合相正極材料及鋰離子擴散係數分析研究
國科會 執行期間:2007-08-01 ~ 2008-07-31
P型透明導電氧化物薄膜開發
紡織產業綜合研究所 執行期間:2007-07-01 ~ 2007-12-31
利用電漿輔助化學氣相沉積法製備矽薄膜太陽能電池開發
中華映管公司 E9507-T01-002 執行期間:2006-09-01 ~ 2007-08-31
利用超音波霧化熱分解法和磁控濺鍍薄膜製備過渡金屬取代之磷酸鋰鐵/石墨鋰離子二次電池正極複合材料
國科會 執行期間:2006-08-01 ~ 2007-07-31
鎂合金極片之電化學特性檢測系統設備開發
傑出材料科技股份有限公司(經濟部SBIR) 執行期間:2006-04-01 ~ 2006-09-30
矽薄膜太陽能電池開發案
中華映管公司 94-P07 執行期間:2005-09-01 ~ 2006-08-31
鎂鋁合金陽極處理之前處理研究
大同大學 B94-T14-096 執行期間:2005-09-01 ~ 2006-07-31
利用共沉法及微波熱處理合成鋰離子二次電池正極複合材料-磷酸鋰鐵/石墨之研究
國科會 執行期間:2005-08-01 ~ 2006-07-31
電漿沉積SnO2與TiO2薄膜並加以表面接枝聚合在積體化之微電子感測器的應用
大同大學 B93-T13-082 執行期間:2004-09-01 ~ 2005-08-31
利用超音波噴霧熱分解法合成奈米級磷酸鋰鐵氧化物正極材料之研究
國科會 93-2216-E-036-019- 執行期間:2004-08-01 ~ 2005-07-31
利用電漿輔助化學沈積法在鎂合金上沈積含矽薄膜之研究
大同大學 執行期間:2003-09-01 ~ 2004-08-31
利用超音波噴霧熱分解法製備合成奈米級鋰錳氧化物正極材料之研究
國科會 92-2216-E-036-021- 執行期間:2003-08-01 ~ 2004-07-31
鋰離子二次電池正極材料鋰錳基氧化物之研究
大同公司 執行期間:2003-05-01 ~ 2004-04-30
鎂鋁合金陰極充氫之研究
大同大學 B91-T19-077 執行期間:2002-09-01 ~ 2003-08-31
鈦鎳形狀記憶合金的功能性鍍膜及其醫工應用開發研究(I)
國科會 91-2216-E-036-016- 執行期間:2002-08-01 ~ 2003-07-31
鋰離子二次電池正極材料鋰錳基氧化物之研究
大同公司 執行期間:2002-05-01 ~ 2003-04-30
以溶膠-凝膠法製備水溶性有機改質矽化物塗層於鎂合金表面之研究
大同大學 B90-1720-01 執行期間:2001-09-01 ~ 2002-08-31
鈦鎳形狀記憶合金之工程應用開發研究─子計畫四--鈦鎳形狀記憶合金醫工用鍍層之探討及其醫工應用開發研究
國科會 執行期間:2001-08-01 ~ 2002-07-31
...
國科會 執行期間:2001-08-01 ~ 2002-12-31
鋰離子二次電池正極材料鋰錳基氧化物之研究
大同公司 執行期間:2001-05-01 ~ 2002-04-30
AZ系鎂合金的非鉻系陽極處理
中山科學研究院 BV90E03P 執行期間:2001-01-01 ~ 2001-12-31
鈦鋁介金屬在磷酸水溶液中陽極處理時間對其高溫抗氧化性之研究
大同大學 執行期間:2000-09-01 ~ 2001-08-31
鋰離子二次電池正極材料-鋰錳基氧化物之研究
大同公司 執行期間:2000-05-01 ~ 2001-04-30
 
專 利 (Patent)
楊木榮,吳錫侃, "利用陽極處理改善鈦鋁介金屬的高溫耐氧化," 中華民國專利460616(2002)
吳溪煌, 林永仁, 楊木榮, 劉文仁, 陳怡亘, "以噴霧燃燒法製備鋰離子二次電池正極材料," 中華民國經濟部智慧財產局專利核准審定通過. 發文字號: (92)智專二(一)04079字第09220657380號
吳溪煌, 林永仁, 楊木榮, 劉文仁, 陳怡亘,, "鋰離子二次電池正極材料之製作方法," 中華民國經濟部智慧財產局專利核准審定通過. 發文字號: (92)智專二(一)04079字第09220975930號
4. She-Huang Wu, Yung-Jen Lin, Mu-rong Yang, Wen-Jen Lin, Yi-Shiuan Chen, "Method for producing positive electrode materials of Li-ion secondary battery," US patent 7,078,127B2, Jul. 18, 2006
吳溪煌、楊木榮、柯惟馨、洪源隆、余念潔, "複合相LiFePO4/Li3V2(PO4)鋰電池正極材料之製造方法與應用," 第I319920號
 
期刊論文 Refereed Paper
1.吳浩宇、楊木榮, "LZ91鎂鋰合金微弧氧化後進行疏水處理之研究," 金屬熱處理, vol. 128, pp. 51-59, 2016
2.李明禧、楊木榮, "以田口方法探討純鈦金屬的微弧氧化陶瓷層耐磨耗之最佳化研究," 金屬熱處理, vol. 127, pp. 51-57, 2015
3.謝祐誠、楊木榮, "AZ61鎂合金微弧氧化/陽極丙烯酸電泳塗裝複合處理之參數優化研究," 金屬熱處理, vol. 126, pp. 31-38, 2015
4. Yu-Ching Hsu, Tony Chang Chi Wu, I-Chun Cheng, Jian-Zhang Chen, and Mu-Rong Yang, "Dye-Sensitized Solar Cell with Photoanode Made with Polystyrene-Ball-Embedded TiO2 Pastes," Japanese Journal of Applied Physics, Vol. 50, pp. 06GF09-1-3, 2011 SCI 
5. Mu-Rong Yang and Wei-Hsin Ke, "The Doping Effect on the Electrochemical Properties of LiFe0.95M0.05PO4 (M = Mg2+, Ni2+, Al3+, or V3+) as Cathode Materials for Lithium-Ion Cells," Journal of The Electrochemical Society, Vol.155, No.10 A729-A73, Aug. 2008 SCI 
6. Chien-Hui Chen, Mu-Rong Yang, and Shyi-Kaan Wu, "Polymerized hexamethyldisilazane coated on equiatomic TiNi shape memory alloy using DC-pulsed plasma assisted chemical vapor deposition," Surface and Coatings Technology, Surface & Coatings Technology 202 (2008) 2709–2714 SCI 
7.Teng, Tsung-Hsien; Yang, Mu-Rong; Wu, She-hung; Chiang, Yi-Ping, "Electrochemical properties of LiFe0.9Mg0.1PO4/carbon cathode materials prepared by ultrasonic spray pyrolysis," Solid state Ionics, Vol. 142, Issue: 7, 2007, pp. 389-392. SCI 
8.Mu-Rong Yang, Wei-hsin Ke and She-huang Wu, "Improving electrochemical properties of LiFePO4 by addition of vanadium," Journal of Power Sources, Vol. 165, Issue: 2, 2007, pp. 646-650. SCI 
9. Chien-Hui Chen, Mu-Rong Yang, and Shyi-Kaan Wu, "Immobilized heparin onto TiNi shape memory alloy modified with acrylamide by UV-Induced grafting," MATERIALS TRANSACTIONS, 48(3) pp. 348-351, Mar. 2007 SCI 
10.The Improvement of High-Temperature Oxidation of α2-Ti3Al by Anodic Coating in the Phosphoric Acid w, "S.K. Wu , M-R Yang and J.R. You," Intermetallics, Vol. 15, Issue 2, 2007, pp. 145-147. SCI 
11. Mu-Rong Yang, Tsung-Hsien Teng, and She-hung Wu, "LiFePO4/carbon cathode materials prepared by ultrasonic spray pyrolysis," Journal of Power Sources, 159 (2006) 307–311. SCI 
12.14. Ko-Shao Chen, Ming-Shu Li, Hsin-Ming Wu, Mu-Rong Yang, Ji-Yan Tian, Feng-Yi Huang, Huang-Yuan Hu, "Surface organic modification of inorganic substrates by plasma deposition of tin oxide organic-like thin films and grafting polymerization," Surface & Coatings Technology, 200 (2006) 3270 – 3277 SCI 
13. Mu-Rong Yang, Wei-Shin Ke, and She-huang Wu, "Preparation of LiFePO4 powders by co-precipitation," Journal of Power Sources, Vol. 146, No. 1-2, pp 539-543, Aug. 2005 SCI 
14. Mu-Rong Yang, Ko-Shao Chen, Yuan-An Ku, Tim-Mo Chen, and Feng-Huei Lin, "Preparation and characterization of hydroxyapatide powder/poly(acrylamide/itaconic acid) composite hydrogel," SCI on Materials Science Forum, Vol. 426-432, No. 4, pp 3055-3060, 2003 SCI 
15. Mu-Rong Yang, Ko-Shao Chen, Yuan-An Ku, Tim-Mo Chen, and Feng-Huei Lin, "The improvement of biocompatibility of an equiatomic TiNi shape memory alloy by DC plasma-polymerized hexamethyldisilazane coatings," SCI on Materials Science Forum, Vol. 426-432, No. 4, pp 3055-3060, 2003 SCI 
16. Ko-Shao Chen, Jui-Che Tsai, Chih-Wei Chou, Mu-Rong Yang, and Jen-Ming Yang, "Effects of additives on the photo-induced grafting polymerization of N-isopropylacrylamide gel onto PET film and PP nonwoven fabric surface," SCI on Materials Science and Engineering C, Vol. 20, No. 1-2, pp. 203-208, May. 2002 SCI 
17.Mu-Rong Yang, Ko-Shao Chen, Jui-Che Tsai, Cheng-Cheng Tseng, Shuen-Fuh Lin,, "The antibacterial activities of hydrophilic-modified nonwoven PET," SCI on Materials Science and Engineering C, Vol. 20, No. 1-2, pp 167-173, May. 2002 SCI 
18. Mu-Rong Yang and S.K. Wu, "The improvement of high-temperature oxidation of Ti-50Al by anodic coating in the phosphoric acid," SCI on Acta Materialia, Vol. 50, No. 4, pp 691-701, Feb. 2002 SCI 
19. Mu-Rong Yang and S.K. Wu, "Oxidation Resistance Improvement of Ti-50Al Intermetallics by Pre-oxidation at High Pressure Oxygen," SCI on Oxidation of Metals, Vol. 54, No. 5-6, pp 473-490, Dec. 2000 SCI 
20. Mu-Rong Yang and S.K. Wu, "Oxidation Resistance Improvement of Ti-50Al Intermetallics by Pre-oxidizing and Subsequent Polishing," SCI on Materials Chemistry and Physics, Vol. 65, No. 2, pp 144-149, Jul. 2000 SCI 
21. Tzu-Piao Tang, Mu-Rong Yang, and Ko-Shao Chen, "Effect of LiCl flux on the red ZnS:Sm phosphors fired in reductive atmosphere," SCI on Ceramics International, Vol. 26, No. 4, pp 341-346, May. 2000 SCI 
22. Mu-Rong Yang and S.K. Wu, "DC plasma-polymerized hexamethyldisilazane coatings of an equiatomic TiNi shape memory alloy," SCI on Surface and Coatings Technology, Vol. 127, No. 2, pp 274-281, May. 2000 SCI 
23. Tzu-Piao Tang, Mu-Rong Yang, and Ko-Shao Chen, "Photoluminescence of ZnS: Sm Phosphor Prepared in a Reductive Atmosphere," SCI on Ceramics International, Vol. 26, No. 2, pp.153-158 ,Mar. 2000 SCI 
24. Mu-Rong Yang, Ko-Shao Chen, and Shao Ta Hsu, "Fabrication and Characteristics of SiOx Films by Plasma Chemical Vapor Deposition of Tetramethylorthosilicate," SCI on Surface Coatings and Technology,, Vol. 123, No. 2-3, pp 204-209, Jan. 2000 SCI 
25. Ko-Shao Chan, Mu-Rong Yang, and Shao-Ta Hsu, "Fabrication and Characteristic of Fluorine Contained Films by Plasma Polymerization of Octafluorotoluene," SCI on Materials Chemistry and Physic, Vol. 61, pp. 214-218,1999 SCI 
 
國際研討會論文 International Conference Paper
1. Wei-Shin Ke, Mu-Rong Yang, and She-huang Wu, "The doping effect of LiFe1-0.05M0.05PO4 (M= Mg, K, V, Al, Zn or Ni) on the electrochemical properties," IMLB 2006 meeting (International Meeting on Lithium Batteries) ,, June 18-23,2006, (Biarritz, France)
2. Mu-Rong Yang, Tsung-Hsien Teng, and She-huang Wu, "Electrochemical properties of LiFe0.9Mg0.1PO4/carbon cathode materials prepared by ultrasonic spray pyrolysis," 2006 IBA-HBC Conference, Waikoloa, Hawaii, U.S.A.,, Jan. 9-12, 2006.
3. Mu-Rong Yang, Wei-hsin Ke, and She-huang Wu, "Improving electrochemical properties of LiFePO4 by vanadium doping," 2006 IBA-HBC Conference, Waikoloa, Hawaii, U.S.A.,, Jan. 9-12, 2006
4.Ko-Shao Chen, Ming-Shu Lee, Mu-Rong Yang, Ji-Yan Tian, Feng-Yi Huang, Huang-Yuan Hung,, "The Study and Application of PECVD Films on Impedance-Type Integrated Multifunctional Chemical Sensors," 5th East Asian Conference on Chemical Sensors, Huis Ten Bosch, Sasebo-shi, Japan
5. K.S. Chen, P.Y. Wang, M.R. Yang, C.S. Lin, and T.Z.Wu, "Application of Plasma Polymerized HMDSZ Films and Post Treatments on QCM Humidity Sensors," 5th East Asian Conference on Chemical Sensors, (Huis Ten Bosch, Sasebo-shi, Japan)
6. Mu-Rong Yang, Tsung-Hsien Teng, and She-hung Wu, "LiFePO4/carbon cathode materials prepared by ultrasonic spray pyrolysis," ICMAT 2005 SYMPOSIUM P, 2005 (Singapore)
7. Mu-Rong Yang, Wei-Shin Ke, and She-huang Wu, "The effect of heat treatment on lattice constant in LiFePO4 for electrochemistry characterization," ICMAT 2005 SYMPOSIUM P, 2005 (Singapore)
8. Wei-Shin Ke, Mu-Rong Yang and She-huang Wu, and , "Preparation of LiFePO4 powders by co-precipitation," 12th International Meeting on Lithium Batteries, Nara, Japan, June 27-July 2, 2004
9. Tsung-Hsien Teng, Mu-Rong Yang, and She-hung Wu, "Effects of the post heat treatment on the performance of the ultrasonically spray-pyrolysed LiMn2O4 cathode powders for Li-ion batteries," 12th International Meeting on Lithium Batteries, Nara, Japan, June 27-July 2, 2004
10. Mu-Rong Yang, Ko-Shao Chen, S.K. Wu, and Jui-Chi Lee, " The improvement of biocompatibility of an equiatomic TiNi shape memory alloy by DC plasma-polymerized hexamethyldisilazane coatings," THERMEC’2003, 2003 (Madrid, Spain)
11. Ko-Shao Chen, Mu-Rong Yang, Yuan-An Ku, Tim-Mo Chen, and Feng-Huei Lin, "Preparation and Characterization of hydroxyapatide powder/poly(acrylamide/itaconic acid) composite hydrogel," THERMEC’2003, 2003 (Madrid, Spain)
12. Jui-Che Tsai, Ko-Shao Chen, Mu-Rong Yang, Cheng-Cheng Tseng, and Shuen-Fuh Lin, "Hydrophilic modification of PET nonwoven and the antibactierial activities evaluated," ICMAT2001 SYMPOSIUM, B10-20, pp. 82 (Singapore)
13. Ko-Shao Chen, Chih-Wei Chou, and Mu-Rong Yang, "Effect of additives on the photo-induced grafting polymerization of N –Isopropylarcrylamide gel onto the polymers surface," ICMAT2001 SYMPOSIUM, B11-24, pp. 92 (Singapore)
14.Jui-Che Tsai, Ko-Shao Chen, Mu-Rong Yang, Ching-Cing Tseng, Shuen-Fun Lin,, " SURFACE GRAFTED VINYL QUARTERNARY AMMONIUM SALT ONTO PET NONWOVEN AND THEIR ANTIBACTERIAL ACTIVITIES," 5th Asian Symposium on Biomedical Materials, p. 157(Hong Kong), Dec. 9-12, 2001
15. Ko-Shao Chen, Chih-Wei Chou, Mu-Rong Yang, Shuen-Fuh Lin, and Fzong-Zeng Wu, " SURFACE GRAFTING POLYMERIZATION AND CROSSLINKING OF THERMOSENSITIVE NIPAAM HYDROGEL ONTO PLASMA TREATED POLYMERS," 5th Asian Symposium on Biomedical Materials, p. 157(Hong Kong), Dec. 9-12, 2001
16. Mu-Rong Yang and S.K. Wu, "Improvement of the Corrosion Resistance of TiNi Shape Memory Alloy by DC Plasma-Polymerized Hexamethyldisilazane Coatings," 5th International Conference on Structural & Functional Intermetallics, 2000(Vancouver, Canada)
17. Mu-Rong Yang and S.K. Wu, "Improvement of the High-Temperature Oxidation Resistance of Ti-50Al by Anodic Coating in the Phosphoric Acid," 5th International Conference on Structural & Functional Intermetallics, 2000 (Vancouver, Canada)
 
區域研討會論文 Domestic Conference Paper
1.Yi-Chen Tsai, Mu-Rung Yang, "THE EFFECT OF PARTIAL PRESSURE OF OXYGEN ON THE PROPERTIES OF AL-DOPED ZINC OXIDE THIN FILMS BY RF REACTIVE MAGNETRON SPUTTERING," 台灣光電科技研討會, 台灣光電科技研討會,清華大學,新竹,Dec. 15, 2006
2. Hsiao-Kuan Tsai(蔡曉寬) Mu-Rong Yang(楊木榮), "Influence of RF power on the performance of aluminum doped zinc oxide films by RF magnetron sputtering," 中國材料科學學會95年年會, 中國材料科學學會95年年會, 成功大學, 台南, Nov. 24-25, 2006
3. 溫文杰 楊木榮 王一晴, "濺鍍時間及後續熱處理氣氛對AZO透明導電膜特性影響之研究," 中國材料科學學會95年年會, 中國材料科學學會95年年會, 成功大學, 台南, Nov. 24-25, 2006
4.楊木榮、余宣毅, "以RF磁控濺鍍沉積AZO透明導電膜之研究," 材料年會2005, 2005(台北)
5. Tsung-Hsien TENG(鄧宗憲), Mu-Rong Yang (楊木榮), and She-Huang Wu (吳溪煌), "Effects of the post-treatment of the ultrasonically spray-pyrolysed LiMn2O4 powders on the performance of the secondary battery," 陶業年會2003, 2003(台北)
6.柯惟馨,楊木榮,吳溪煌, "熱處理溫度對鋰離子二次電池正極材料LiFePO4之影響," 陶業年會2003, 2003(台北)
7. 李瑞騏, 楊木榮, 陳克紹, and 吳錫侃, "利用脈衝直流電漿聚合六甲基二矽胺膜來改善鈦鎳形狀記憶合金的生物適應性," 材料年會2003, 2003 (台南)
8. 柯惟馨, 楊木榮, and 吳溪煌, "助導劑的塗佈對鋰離子二次電池正極材料LiFePO4 電化特性之影響," 材料年會2003, 2003 (台南)
9. 楊惟婷, 楊木榮, and 洪衛朋, "利用脈衝直流電漿輔助氣相沉積系統改善鎂合金的抗蝕性," 材料年會2003, 2003 (台南)
10.李瑞騏,楊木榮,陳克紹,吳錫侃, "利用脈衝直流電漿聚合六甲基二矽胺膜來改善鈦鎳形狀記憶合金的生物適應性," 材料年會2003 (台南), 材料年會
11.柯惟馨,楊木榮, 吳溪煌, "助導劑的塗佈對鋰離子二次電池正極材料LiFePO4 電化特性之影響," 材料年會2003 (台南), 材料年會
12.柯惟馨,楊木榮,吳溪煌, "熱處理溫度對鋰離子二次電池正極材料LiFePO4之影響," 陶業年會2003(台北), 陶業協會
13. 蔣以平, 鄧宗憲, and 楊木榮, "利用超音波霧化熱分解法製備鋰離子二次電池正極材料," 材料年會, 2002 (台北)
14. 李瑞騏, 楊木榮, and 吳錫侃, "利用電漿聚合六甲基二矽胺膜來改善鈦鎳形狀記憶合金的生物適應性," 材料年會2002, 2002 (台北)
 
研究計劃成果報告 Project Report
1.楊木榮, 電漿沉積SnO2與TiO2薄膜並加以表面接枝聚合在積體化, 大同大學基礎研究, B93-T13-082, Sep. 2004
2.楊木榮, 利用超音波噴霧熱分解法合成奈米級磷酸鋰鐵氧化物正極材料之研究, 國科會研究報告, NSC 93-2216-E-036-019, Aug. 2004
3.楊木榮, 利用電漿輔助化學沈積法在鎂合金上沈積含矽薄膜之研究, 大同大學基礎研究, Sep. 2003
4.楊木榮, 利用超音波噴霧熱分解法製備合成奈米級鋰錳氧化物正極材料之研究, 國科會研究報告, NSC 92-2216-E-036-021, Aug. 2003
5.吳溪煌, 楊木榮, 林永仁, 鋰離子二次電池正極材料-鋰錳基氧化物之研究, 大同公司, May, 2003
6.楊木榮, 鎂鋁合金陰極充氫之研究, 大同大學基礎研究, B91-T19-077, Sep. 2002
7.楊木榮, 鈦鎳形狀記憶合金的功能性鍍膜及其醫工應用開發研究(I), 國科會研究報告, NSC 91-2216-E-036-016, Aug. 2002
8.吳溪煌, 楊木榮, 林永仁, 鋰離子二次電池正極材料-鋰錳基氧化物之研究, 大同公司, May, 2002
9.楊木榮, 以溶膠-凝膠法製備水溶性有機改質矽化物塗層於鎂合金表面之研究, 大同大學基礎案研究, B90-1720-01, Sep. 2001
10.楊木榮, 子計畫四--鈦鎳形狀記憶合金醫工用鍍層之探討及其醫工應用開發研究, 國科會研究報告, NSC 90-2216-E-036-021, Aug. 2001
11.吳溪煌, 楊木榮, 林永仁, 鋰離子二次電池正極材料-鋰錳基氧化物之研究, 大同公司, May. 2001
12.楊木榮, AZ系鎂合金的非鉻系陽極處理, 中山科學研究案報告, BV90E03P, Jan. 2001
13.楊木榮, 鈦鋁介金屬在磷酸水溶液中陽極處理時間對其高溫抗氧化性之研究, 大同大學基礎研究, Sep. 2000
14.吳溪煌, 楊木榮, 林永仁, 鋰離子二次電池正極材料-鋰錳基氧化物之研究, 大同公司, May. 2000