大同大學 教職員資料 (Information of TTU Faculty & Staff)
基本資料 (Basic Info)
姓名：張志雄 (Chang, Jyh-Shyong) 教授
單位：化學工程與生物科技學系  
電話：02-25925252-2561-113  
手機：  
email：jschang@ttu.edu.tw  
網址：  
學歷 (Education)
國立台灣大學 化學工程研究所 博士 (1983/09 ~ 1988/01)
經歷 (Experience)
大同大學 化學工程學系 教授 (1996/2 ~ 今)
大同大學 化工系 系所主任 (2002/8 ~ 2008/7)
大同大學 建教組 主任 (2002/1 ~ 2002/7)
大同工學院 化學工程學系 副教授 (1988/1 ~ 1996/1)
台灣大學 化學工程學系 助教 (1984/9 ~ 1987/6)
中油公司高雄煉油廠 二甲苯分離工廠 化學工程師 (1979/9 ~ 1981/8)
中油公司高雄煉油廠 第一輕油裂解工廠 化學工程師 (1976/7 ~ 1979/8)
專長 (Specialty)
化學反應工程 Chemical Reaction Engineering
實驗設計 Design and Analysis of Experiments
聚合反應工程 Polymerization Reaction Engineering
程序控制 Process Control
系統最適化 System Optimization
開授課程 (Course)
類神經網路在化工之應用 Application of Neural Networks to Chemical Engineering
化學反應工程 Chemical Reaction Engineering
實驗設計 Design and Analysis of Experiments
數值方法 Numerical Method
程序控制 Process Control
期刊論文 (Journal Paper)
1. Jyh-Shyong Chang, Jen-Chieh Cheng, Tzong-Rong Ling, Jia-Ming Chern, Gow-Bin Wang, Tse-Chuan Chou, Chin-Tsou Kuo(2017). Low acid value bio-gasoline and bio-diesel made from waste cooking oils using a fast pyrolysis process. Journal of the Taiwan Institute of Chemical Engineers, 73. SCIE(SCI)
2. Tzong-Rong Ling, Jyh-Shyong Chang, Yuh-Jing Chiou, Jia-Ming Chern, Tse-Chuan Chou(2016). Characterization of high acid value waste cottonseed oil by temperature programmed pyrolysis in a batch reactor. Journal of Analytical and Applied Pyrolysis, 120. SCIE(SCI)
3. Jyh-Shyong Chang, Wei-Ling Liu, Jiun-Kai Tang, Wen-Chin Lin, Yuh-Jing Chiou(2014). Expected improvement in efficient experimental design supported by a global optimizer. Journal of the Taiwan Institute of Chemical Engineers, 45(4), 1369-1388. SCIE(SCI)
4. Chang, Jyh-Shyong, Zhang, Yu-Cheng, Chen, Chih-Ching, Ling, Tzong-Rong, Chiou, Yuh-Jing, Wang, Gow-Bin, Chang, Kuen-Tian, Chou, Tse-Chuan(2014). One-Step Synthesis of Gasoline Octane Booster and Diesel Fuel from Glycerol and Tert-Butyl Alcohol. Industrial & Engineering Chemistry Research, 53, 5398−5405. SCIE(SCI)
5. Jyh-Shyong Chang, Wei-Ling Liu, Jiun-Kai Tang, Wen-Chin Lin, Yuh-Jing Chiou(2014). Expected improvement in efficient experimental design supported by. Journal of the Taiwan Institute of Chemical Engineers, 45 (2014), 1369–1388. SCIE(SCI)
6. Chang, Jyh-Shyong*, Zhang, Yu-Cheng, Chen, Chih-Ching, Ling, Tzong-Rong, Chiou, Yuh-Jing, Wang, Gow-Bin, Chang, Kuen-Tian, Chou, Tse-Chuan(2014). One-Step Synthesis of Gasoline Octane Booster and Diesel Fuel from Glycerol and Tert-Butyl Alcohol. Ind. Eng. Chem. Res., 2014(53), 5398−5405. SCIE(SCI)
7. Jyh-Shyong Chang, Yu-Da Lee, Lawrence Chao-Shan C, Tzong-Rong Ling, Tse-Chuan Chou(2012). Methylation of Glycerol with Dimethyl Sulfate To Produce a New Oxygenate Additive for Diesels. Ind. Eng. Chem. Res., 51, 655–661. SCIE(SCI)
8. Jyh-Shyong Chang, Dung-Huei Chen(2011). Optimization on the Etherification of Glycerol with Tert-Butyl Alcohol. Journal of the Taiwan Institute of Chemical Engineers, 42, 760–767. SCIE(SCI)
9. Jiun-Kai TANG, Jyh-Shyong CHANG *(2010). Data-Driven Global Optimization of Constrained Process Systems via a Radial Basis Function Based Method. Journal of Chemical Engineering of Japan, 43(9), 777–791. SCIE(SCI)
10. Rong-Chi Wang, Kuo-Shiuan Fan, Jyh-Shyong Chang(2009). Removal of acid dye by ZnFe2O4/TiO2-immobilized granular activated carbon under visible light irradiation in a recycle liquid–solid fluidized bed. Journal of the Taiwan Institute of Chemical Engineers, 40, 533-540. SCIE(SCI)
11. Jyh-Shyong Chang*, Tzu-Chun Hu, Jiun-Kai Tang(2008). Use of Data-Driven Model to Optimize Scale-up Production of Nanosized Silver. Ind. Eng. Chem. Res., 47, 8337–8346. SCIE(SCI)
12. Jyh-Shyong Chang, * Yuan-Ping Lee, Rong-Chi Wang(2007). Optimization of Nanosized Silver Particle Synthesis via Experimental Design. Ind. Eng. Chem. Res., 46, 5591-5599. SCIE(SCI)
13. Jyh-Shyong Chang*, Shih-Chieh Lu, Yu-Lun Chiu(2007). Dynamic modeling of batch polymerization reactors via the hybrid neural-network rate-f. Chemical Engineering Journal, 130, 19–28. SCIE(SCI)
14. Jyh-Shyong CHANG, Jinn-Tsair LEE, Shiow-Ling LEE(2007). Optimizing the Submerged Cultivation of Monascus anka via a Sequential Pseudo-Uniform Design Method. Journal of Chemical Engineering of Japan, 40(5), 432–440. SCIE(SCI)
15. Jyh-Shyong Chang*, Jinn-Tsair Lee, Audrey-Chingzu Chang(2006). Neural-network rate-function modeling of submerged cultivation of Monascus anka. Biochemical Engineering Journal, 32, 119-126. SCIE(SCI)
16. Chang, J. S., J. P. Lin(2004). Product and Process Development via Pseudo-Sequential Uniform Design. Ind. Eng. Chem. Res., 2004(43), 4278-4292. SCIE(SCI)
17. Chang, J. S., K.Y. Chen(2004). An Integrated Strategy for Early Detection of Hazardous in Chemical Reactors. Chem. Eng. J., 2004(98), 199-211. SCIE(SCI)
18. Chang, J. S., C. L. Chen(2003). Process State Estimation Using Neural Network Rate Function Model with Application to Batch Polymerization Reactors. Chin. Inst. Chem. Engrs., 2003(34), 429-439. SCIE(SCI)
19. Chang, J. S., B. C. Hung(2002). Optimization of Batch Polymerization Reactors Using Neural Network Rate Function Models. Ind. Eng. Chem. Res., 2002(41), 2716-2727. SCIE(SCI)
20. Chang, J. S., P. H. Liao(1999). Molecular Weight Control of a Batch Polymerization Reactor: Experimental Study. Ind. Eng. Chem. Res., 1999(38), 144-153. SCIE(SCI)
21. Chang, J. S., Y. J. Liu(1998). Implementing Operating Trajectories in an Exothermic Chemical Batch Reactor by a Self-Tuning Single Neuron Controller. Chem. Eng. J., 1998(71), 77-85. SCIE(SCI)
22. Chang, J. S., Y. J. Liu, C. F. Ho, C. T. Chen(1997). Application of a Single Neuron Controller for Trajectory Tracking in a Batch Reactor. J. Chin. Inst. Chem. Engrs., 1997(28), 205-215. SCIE(SCI)
23. Chang, J. S., J. S. Hsu, Y. T. Sung(1996). Trajectory Tracking of an Optimizing Path in a Batch Reactor: Experimental Study. Ind. Eng. Chem. Res., 1996(35), 2247-2260. SCIE(SCI)
24. Chang, J. S., S. T. Chung(1995). On-Line Set-Point Optimization and Control of a Batch Polymerization Reactor. J. Chin. Inst. Chem. Engrs., 1995(26), 213-236. SCIE(SCI)
25. Chang, J. S., K. L. Huang(1994). Performance of Control Strategies to Track the Trajectories of Batch Reactors. Can. J. Chem. Engng., 1994(72), 906-919. SCIE(SCI)
26. Chang, J. S., W. J. Chen(1992). Simulation of a Jet-Assisted Circulation Jacketed Batch Reactor for Polymerization of Methylmethacrylate. Can. J. Chem. Eng., 1992(70), 523. SCIE(SCI)
27. Chang, J. S., J. L. Lai(1992). Computation of Optimal Temperature Policy for Molecular Weight Control in a Batch Polymerization Reactor. Ind. Eng. Chem. Res., 1992(31), 861-868. SCIE(SCI)
研討會論文 (Conference Paper)
1. Jyh-Shyong Chang, Jia-Ming Chern, Tzong-Rong Ling(2019). Synthesis and Characterization of Sulfonated Carbon-based Solid Acids for Biodiesel Production. The 37th Taiwan Symposium on Catalysis and Reaction Engineering. R.O.C.
2. Guo-Hao Li, Jen-Chen Chen, Jung-Sheng Chien, Jyh-Shyong Chang, Tzong-Rong Ling, Gow-Bin Wang, Jia-Ming Chern(2017). Production of biogasoline and biodiesel from waste cooking oil. 7th International Symposium on Energy. United States of America.
3. Jyh-Shyong Chang, Ming-Chun Yen, Chiao-Hua Chen(2012). EMMC process for treatment of thin-film transistor liquid crystal display (TFT-LCD) wastewater. 14th Asia Pacific Confederation of Chemical Engineering Congress. United States of America.
4. Jyh-Shyong Chang, Dung-Huei Chen(2011). Global Optimization on the Etherification of Glycerol with Tert-Butyl Alcohol. 8th European Conference of Chemical Engineering. United States of America.
5. Tzong-Rong Ling, Yuan-Jie Zheng, Jyh-Shyong Chang, Tse-Chuan Chou(2011). Consecutive Etherification of Glycerol with Methanol over Sulfonated Catalysts. 8th European Conference of Chemical Engineering. United States of America.
6. Sin-Li Siea, ,Jiun-Kai Tang, Jyh-Shyong Chang*(2009). Study on Aluminum Plates Coated with a Zirconia-sol and Catalyst Mixture for Methanol Steam-reforming in a Rectangular Reactor. PRES09 12th Conference Process Integration, Modelling and Optimisation for Energy, Saving and Pollut. United States of America.
7. Jyh-Shyong Chang*, Tzu-Chun Hu(2007). Use of Data-driven Model to Optimize Scale-up Production of Nanosized Silver Particles. PSE ASIA 2007, August 15-18, 2007, Xian, China（頁 225-226）. Mainland China.
8. J.S. Chang, Y.P. Lee(2006). Optimization of Nanosized Silver Particles Synthesis via Sequential Pseudo-Uniform Design Method. PSE/ESCAPE 2006（頁 883-888）. United States of America.
9. Chang, J. S.(2005). Dynamic modeling of complex batch processes via the hybrid neural-network rate-function approach. 7th World Congress of Chemical Engineering. United States of America.
10. Chang, J. S., Lee J.T.(2004). Optimization of Submerged Cultivation of Monascus Anka via Sequential Pseudo-Uniform Design Method. 2004Korea/Japan/Taiwan Chemical Engineering Conference（頁 153-154）. United States of America.
11. Chang, J.S., S.J.(2004). Neural-Network Rate-Function Modeling of Submerged Cultivation of Monascus Anka. Proceedings of YABEC’04 Symposium（頁 102）. United States of America.
12. Chang, J. S., J. P. Lin(2003). Product and Process Development via Pseudo-Sequential Uniform Design” 53rd Canadian Chemical Engineering Conference.. 53rd Canadian Chemical Engineering Conference. United States of America.
13. Chang, J. S., K. Y. Chen(2002). A Strategy for Early Detection of Hazardous States in a CSTR. PSE Asia 2002（頁 547-550）. United States of America.
14. Chang, J. S., K. Y. Chen(2002). A Strategy for Early Detection of Hazardous States in Batch Reactors. 15th International Congress of Chemical and Process Engineering. United States of America.
15. Chang, J. S., C. L. Chen(2001). Process State Estimation Using Neural Network Rate Function Model with Application to Batch Polymerization Reactors. Symposium On Computer Process Control（頁 73-82）. United States of America.
16. Chang, J. S., J. B. Yang(1999). Thermally Safe Operation of a Conventional Batch Reactor: Experimental Study. The Third Taipei-Kyushu Joint Symposium on Chemical Engineering（頁 249-251）. United States of America.
17. Chang, J. S., Y. J. Liu(1997). Implementing Operating Trajectories in an Exothermic Chemical Batch Reactor by a Self-Tuning PI controller. The 2nd Korea-Taiwan (ROC)-Singapore Symposium on Process Systems Engineering. United States of America.
18. Chang, J. S., P. H. Liao(1996). Low Model-Dependent Optimization and Control. 八十五年程控研討會（頁 245-251）. R.O.C.