大同大學 教職員資料 (Information of TTU Faculty & Staff)
 
基本資料 (Basic Info)
姓名:胡家榮 (Chia-Jung, HU) 副教授
單位:材料工程學系  
電話:0221822928 ext 6228  
手機:  
email:cjhu@ttu.edu.tw  
網址:  
 
學歷 (Education)
國立海洋大學 材料工程 博士 (1998/9 ~ 2001/6)
大同工學院 材料工程 碩士 (1989/7 ~ 1991/6)
大同工學院 材料工程學系 學士 (1985/9 ~ 1989/6)
 
經歷 (Experience)
大同大學 材料工程學系 副教授 (2015/8 ~ 今)
大同大學 材料工程學系 助理教授 (2001/7 ~ 2015/7)
大同工學院 材料工程學系 講師 (1991/7 ~ 1998/8)
 
專長 (Specialty)
破壞力學 Fracture mechanics
非晶金屬 glassy metals
金屬材料 Metallic materials
微弧氧化處理 microarc oxidation
表面改質 surface modification
 
開授課程 (Course)
非晶材料 Amorphous Materials
X光繞射學 Elements of X-ray Diffraction
材料科學導論 Introduction to Materials Science for Engineers
物理冶金 physical metallurgy principles
 
獎勵 (Award)
年度論文優等獎 (大同大學 2007-11-22)
大同大學論文佳作獎 (大同大學 2002-11-18)
大學博覽會成效卓越獎 (大同工學院 1997-08-19)
 
服務 (Service)
熱處理乙丙級技術士技能檢定術科測試監評 (2015-11-01 ~ 今)
校務會議代表 (2015-08-01 ~ 今)
排課系所助理 (2006-08-01 ~ 今)
機械性質測試實驗室管理人 (2005-01-01 ~ 今)
大學部導師 (2003-07-01 ~ 今)
大學博覽會台北會場系所介紹指導老師 (2015-03-01 ~ 2015-03-31)
圖書館委員會委員 (2013-08-01 ~ 2015-07-31)
龍華科技大學工程技術研究所口試委員 (2013-07-01 ~ 2013-07-31)
龍華科技大學工程技術研究所口試委員 (2010-07-01 ~ 2010-07-31)
通識教育課程委員會委員 (2008-08-01 ~ 2009-07-31)
海洋大學材料所碩士口試委員 (2007-06-01 ~ 2007-06-30)
教務處秘書-專辦全校研究案申請公文 (1994-06-01 )
 
研究計畫 (Project)
貴金屬電鍍層成分和膜厚判定-108學年度
矽瑪科技股份有限公司 E108-T02-019 執行期間:2019-08-01 ~ 2020-07-31
化學拋光對鋁合金表面形成陽極氧化層之影響
大同大學 B108-T04-028 執行期間:2019-01-01 ~ 2019-11-30
微弧氧化鎂合金表面製備黑色氧化膜之研究
大同大學 B107-T01-025 執行期間:2018-01-01 ~ 2018-11-30
功能性生醫材料之研發:子計畫(五):微弧氧化製備含氫氧基磷灰石氧化鈦膜層之最佳生醫植入材研究(3/3)
大同大學 B106-T10-051 執行期間:2017-01-01 ~ 2017-11-30
功能性生醫材料之研發:微弧氧化製備含氫氧基磷灰石氧化鈦膜層之最佳生醫植入材研究(2/3)
大同大學 B105-T05-064 執行期間:2016-01-01 ~ 2016-11-30
以線性增加電壓模式對純鈦製備含氫氧基磷灰石氧化鈦膜層之研究
大同大學 B104-T02-015 執行期間:2015-01-01 ~ 2015-11-30
微弧氧化製備含氫氧基磷灰石氧化鈦膜層之最佳生醫植入材研究(1/3)
大同大學 B104-T13-057 執行期間:2015-01-01 ~ 2015-11-30
鋁矽合金微弧氧化之製程參數研究
大同大學 B101-T10-069 執行期間:2012-11-01 ~ 2013-12-31
含少量鋯成分之富銅非晶合金之合成研究
大同大學 B100-T07-013 執行期間:2011-09-01 ~ 2012-07-15
鎂銅基非晶複合材料之製備
大同大學 B99-T05-012 執行期間:2010-09-01 ~ 2011-07-15
鎂基非晶/奈米晶粉末之表面性質與塊狀成型影響
大同大學 B97-T05-005 執行期間:2010-04-01 ~ 0000-00-00
碳化鈦強化銅基金屬玻璃複材之製備研究
大同大學 B98-T03-025 執行期間:2009-09-01 ~ 2010-07-15
鎂基奈米晶合金之儲氫研究
大同大學 B96-07-071 執行期間:2007-09-01 ~ 2008-07-15
非晶金屬粉末於壓力下之結晶行為研究
大同大學 B95-T06-077 執行期間:2006-09-01 ~ 2007-07-15
廉價金屬組成之非晶質合金研究
大同大學 B94-T05-077 執行期間:2005-09-01 ~ 2006-07-15
微量錫鋁硼元素對Cu基非晶質之影響
大同大學 B93-T03-072 執行期間:2004-09-01 ~ 2005-07-15
銅基非晶質合金粉末之合成及特性檢測
國科會 執行期間:2002-08-01 ~ 2003-07-31
 
期刊論文 Refereed Paper
1. Pee-Yew Lee, Yung-Sheng Lin, Chia-Jung Hu, and Chih-Feng Hsu, "The wear properties of Ti-based bulk metallic glass composites containing carbon particles," Journal of Alloys and Compounds , 707 (2017) 92-96 SCI 
2. Chia-Jung Hu, Pee-Yew Lee, Yeh-Ming Cheng, and Jyun-Yu Chen, "Formation and Corrosion Behavior of Mechanically-Alloyed Cu–Zr–Ti Bulk Metallic Glasses," Metals , 2017, 7, 148 SCI 
3.胡家榮、江瑋倫, "鎂銅基非晶材料之製備," 大同學報, 第三十期,pp.1-9 (2015)
4. Chia-Jung Hu, Liu-Ho Chiu, Chi-Ying Tsai, Kuan-Hung Chen, and Heng Chang, "Effect of Coarse Second-Phase Particles on Galvanic Corrosion of Anodized 6061 Aluminum Alloy Coupled with C1100 Copper," Int. J. Electrochem. Sci., 10(2015) 6572-6585 SCI 
5. Chia-Jung Hu, Yi Hu, C.-Y. Ni, and Tung-Cheng Liu, "Effect of Annealing at Oxygen Partial Pressure on the Conductivity of Ni0.5Mn2.5O4 Oxides," Journal of Materials Science-Materials in Electronics, 26 (2015) 4172–4177 SCI 
6. Chia-Jung Hu and Po-Han Chiu, "Wear and Corrosion Resistance of Pure Titanium Subjected to Aluminization and Coated with a Microarc Oxidation Ceramic Coating," International Journal of Electrochemical Science, 10 (2015) 4290-4302 SCI 
7. Chia-Jung Hu and Jia-Rong Lu, "Preparation of Hydroxyapatite-Containing Coatings on Pure Titanium by Linearly Increasing the Voltage in the Pulsed Bipolar Microarc Oxidation Process," International Journal of Electrochemical Science, 10 (2015) 749 - 758 SCI 
8. Chia-Jung Hu and Ming-Han Hsieh, "Preparation of ceramic coatings on an Al-Si alloy by the incorporation of ZrO2 particles in microarc oxidation ," Surface and Coatings Technology, 258 (2014) 275-283 SCI 
9. S.Z. Yang, C.H. Hsu, H.N. Lee, C.J. Hu, and C.Y. Yang, "Study on Wear Resistance of AISI 304 Stainless Steel Arc-coated TiN/CrN Multilayer Films," 金屬熱處理, 118 (2013) 44-49
10. Mu-Rong Yang, Chia-jung Hu, Jeou-Long Lee, and Chin-Yuan Lu, "Self-lubricative coatings deposited by micro-plasma oxidation on 7075-T6 aluminum alloys in the solution of aluminate/molybdenum disulfide," ECS Trans., 33(30), 39(2011) EI 
11. C J HU, H M WU, and T Y Chen, "Synthesis of Mg-Cu-Ti based amorphous alloys by mechanical alloying technique," journal of physics: conference series, 144 (2009) 012020
12. H M Wu, C J Hu, and K Y Pai, "Effect of composition and heat treatment on the phase formation of mechanically alloyed Cr-B and Mo-B powders," Journal of physics: conference series, 144 (2009) 012018
13. Hsin-Ming Wu, Chia-Jung Hu, and Hsing-Ching Li, "Formation of Co-Fe-M-B (M=Zr, Ti) amorphous powders by mechanical alloying and their magnetic properties," Journal of alloys and compounds, accepted, Sep. 2008 SCI 
14. Hsin-Ming Wu, Chia-Jung Hu, and Yan-Dong Cheng, "Formation and magnetic properties of Co-M-Ti-B (M=Fe, Nb) amorphous Powders by Mechanical Solid-State Reaction," Rev. Adv. Mater. Sci., 18 (2008) 253-256 SCI 
15. Chia-Jung Hu and Hsin-Ming Wu and , "Formation of Cu-Zr-Ti amorphous powders with B and Si additions by mechanical alloying technique," Journal of Alloys and Compounds, 434-435 (2007) 390-393. SCI 
16. Chang-Hsun Hsu, Ming-Li Chen, and Chia-Jung Hu, "Microstructure and Mechanical Properties of 4% Colbalt and Nickel alloyed ductile Irons," Materials SCience Engineering A, 444 (2007) 339-346 SCI 
17. Hsin-Ming Wu, Chia-Jung Hu and Ya-Hui Chou, and , "Preparation of SiC/MoSi2 Composites by Mechanical Alloying and Its Fracture Properties," Materials Science Forum, Vols. 539-543 (2007) pp. 1047-1052. (SCI) SCI 
18. Chia-Jung Hu and Pee-Yew Lee and , "Formation of Cu-Zr-Ni Amorphous Powders with Significant Supercooled Liquid Region by Mechanical Alloying Technique," Materials Chemistry and Physics., 74(2002) 13-18 SCI 
19.Chia-Jung Hu, Jium-Shyong Chen and Pee-Yew Lee,, "Ballistic Performance and Microstructure of Modified Rolled Homogeneous Armor Steel,," Journal of the Chinese Institute of Engineers,, Vol.25, No.1, pp. 99-107 (2002). SCI 
20.Chia-Jung Hu, Jium-Shyong Chen, Chien-Yung Ma, Diing-Guey Hwang and Pee-Yew Lee,, " Investigation on the Mechanical Properties of Improved Ni-Cr-Mo Steel,," Journal of Materials Science and Engineering(材料科學與工程),, Vol. 33, No. 2, pp. 82--88 (2001).
21.胡家榮、許楠鋒、李丕耀,, "機械合金法合成之Ti64Ni30Si4B2非晶質合金粉末特性研究,," 粉末冶金會刊, 第26卷第1期(2001年2月).
22.胡家榮、許正勳、李深智、潘秀鳳,, "非熱處理型ADC12壓鑄鋁合金經析出硬化處理之特性," 金屬熱處理,, 第54期,86年9月,P.41-44。
23.許正勳、李深智、游元信、施議訓、胡家榮,, "肉厚大小添加銅及沃斯回火熱處理對縮墨鑄鐵破裂韌性之研究," 鑄工季刊,, 第93期, 1997/6 ,p.41-51.
24.李深智、許正勳、胡家榮、張肇家、馮慧平,, "不同厚斷面ADI破裂韌性研究," 鑄工季刊, 第93期, 1997/6 ,p.52-58。
25.S. C. Lee, C. H. Hsu, C. J. Hu, C. C. Chang, and H. P. Feng,, "Effects of Mass and Bi Element on Fracture Toughness Study of ADI," Chinese Journal of Materials Science,, vol. 29,No.3, pp.185-194 (1997).
26.邱茂展、李深智、許正勳、胡家榮,, "Mn含量對不同厚斷面延性鑄鐵機械性質之影響," 鑄工季刊,, 第89期, 1996/6 ,p.1-7,。
27.林玉如、林信甫、胡家榮、許正勳、李深智,, "沃斯回火球墨鑄鐵上下臨界溫度間熱處理之顯微組織與性質研究," 金屬熱處理,, 第49期,1996,6,p.23-27。
28.李秉興、胡家榮、李深智,, "麻散鐵系不銹鋼之晶粒細化熱處理",,," 金屬熱處理, 第48期, 85年3月,P.17-24。
29.吳兆奇、謝信宏、胡家榮、許正勳、李深智,, "ADI量產之恆溫熱處問題", ,," 鑄工季刊, 第87期,December/1995, p.43-48。
30.Y.B. Chang, S.C. Lee and C. J. Hu,, "Low-temperature fracture toughness study of Fe-7Al-27Mn-C alloys," Journal of Materials Science,, vol. 30, 1995,pp. 4598-4602. (SCI) SCI 
31.胡家榮、李深智,, ""黃銅耐鋅脫鋅之評估",," 金屬工業,, September/1993, vol. 27, pp. 147-150.
 
國際研討會論文 International Conference Paper
1. L. H. Chiu, Y.S. Chen, X. Lin, C. J. Hu, and Chung-Chun Wu, "Characterization and Wear Behaviors of SUJ 2 Steel in Different Microstructure," 25th IFHTSE Congress, 0627V2, Xi’an, China, 2018/09/12-14
2.Chia-Jung Hu, Jeou-Long Lee, Chin-Yuan Lu, Yu-Chia Lin, Mu-, Yu-Chia Lin and Mu-Rong Yang, "Self-lubricative coatings deposited by micro-plasma oxidation on 7075-T6 aluminum alloys in the solution of aluminate/molybdenum disulfide," 218th ECS Meeting, October 10th-15th, 2010, Las Vegas, Nevada, US.
3. Chia-jung Hu, Hsin-Ming Wu, and Tse-Yu Chen, "Synthesis of Mg-Cu-Ti based amorphous alloys by mechanical alloying technique," The 13th International Conference on Rapidly Quenched & Metastable Materials, August 24th -29th 2008, Dresden, Germany.
4. Hsin-Ming Wu, Chia-Jung Hu, and K. Y. Pai, "Effects of composition and heat treatment on the phase formation of mechanically alloyed Cr-B and Mo-B powders," The 13th International Conference on Rapidly Quenched & Metastable Materials, August 24th -29th 2008, Dresden, Germany.
5. Hsin-Ming Wu, Ho Chang, Chia-Jung Hu, and Chang-Chan Lin, "Phase formation of half-Heusler ZrNiSn compound by mechanical alloying and subsequent annealing treatment," 15th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2008), July 6th -10th 2008, Buenos, Argentina
6. Hsin-Ming Wu, Chia-Jung Hu, Hsing-Ching Li, and Shuo-Jhang Hung, "Preparation of in-situ strengthening TiB2 in conducting Cu-based composites by mechanical alloying," proceeding of 6th intrnational conference on materials processing for properties and performance, ISBN:978-981-05-9014-7, ID 1379, 13-16 September, 2007 Beijing, China.
7. Chia-Jung Hu*, Hsin-Ming Wu, and Mei-Fang Liao, "Synthesis of Cu-Ti-Ni Based Amorphous Alloys by Mechanical Alloying Technique," 14th International Symposium on Metastable and Nano Materials(ISMANAM2007), Aguest 26th -30th 2007, Corfu, Greece
8. Hsin-Ming Wu, Chia-Jung Hu, and Hsing-Ching Li, "Formation of Co-Fe-M-B (M=Zr, Ti) Amorphous Powders by Mechanical Alloying and Their Magnetic Properties," 14th International Symposium on Metastable and Nano Materials (ISMANAM2007), August 26th -30th 2007, Corfu, Greece
9. Hsin-Ming Wu, Chia-Jung Hu, and Yan-Dong Cheng, "Formation of soft magnetic Co-M-Ti-B(M=Fe, Nb) amorphous powders by mechanical alloying," International Symposium on Metastable and Nano Materials (ISMANAM), Warsaw, Poland, 27th-31st August 2006
10. Chia-Jung Hu, Hsin-Ming Wu, and Miao-Yaun chang, "Formation of Cu-Zr-Ti-Sn amorphous powders by mechanical alloying technique," International Symposium on Metastable and Nano Materials (ISMANAM),, Warsaw, Poland, 27th-31st August, 2006
11. Hsin-Ming Wu, Chia-Jung Hu, and Y. H. Chou, "Preparation of SiC/MoSi2 Composites by Mechanical alloying and its Fracture Properties," International Conference on Processing & Manufacturing of Advanced Materials, Vancouver, Canada, 4-8 July 2006
12. Chia-Jung Hu and Hsin-Ming Wu, "Formation of Cu-Zr-Ti amorphous powders with B and Si additions by mechanical alloying technique," 12th International Symposium Metastable and Nano Materials (ISMANAM), Paris, France, 4-7 July 2005
 
區域研討會論文 Domestic Conference Paper
1.林秀、胡家榮、邱六合、吳忠春, "相同硬度下不同組織SUJ2軸承鋼的檢測分析," 台灣金屬熱處理學會2018會論文研討會高熱爐業論文獎論文集, 論文編號: 001,國立臺北科技大學,台北市
2.葉晨、鄧力翔、胡家榮、邱六合、吳忠春, "細化處理對過共晶鋁矽合金A390微弧氧化層之影響," 106年度TWlMA台灣輕金屬協會年會論文, pp.78-85.
3.戴啟勝、胡家榮、楊木榮, "電解液添加硼酸對ADC12 壓鑄鋁合金陽極膜層之影響," 料科學學會2012年度年會論文集, 2012/11
4. Wei-Che Tseng, Chia-Jung Hu, and Mu-Rong Yang, "The study of effect of cathodic current on growth mechanism of coatings by plasma electrolytic oxidation," 料科學學會2012年度年會論文集, 2012/11
5.何耿碩、江瑋倫、胡家榮, " 機械合金法合成鎂基合金材料之研究,," 料科學學會2010年度年會論文集, 2010/11
6.康宏誠、楊智閔、胡家榮, "機械合金法合成銅基非晶複合材料之研究," 料科學學會2010年度年會論文集, 2010/11
7.吳明峰、胡家榮、楊木榮, "微弧氧化的沉積參數對鈦金屬上沉積磷灰石陶瓷結構的影響," 中華民國陶業研究學會2010年會, 2010, 5月
8.胡家榮、江瑋倫、黃廷耀, "鋁基塊狀非晶合金之粉末冶金製程研究," 中國材料科學學會2009年度年會論文集, 2009/11.
9.胡家榮、楊智閔、賴彥伯, "添加錫、矽、硼對銅-鈦-鎳非晶合金粉末之非晶質化特性研究影響," 中國材料科學學會2008年度年會論文集, 2008/11
10.胡家榮、黃廷耀、賴永祥, "銅-鈦基塊狀非晶合金之粉末冶金製程研究," 中國材料科學學會2008年度年會論文集,, 2008/11
11.胡家榮、賴彥伯、彭彥智, "銅基四元非晶質合金粉末製備之研究," 中國材料科學學會2007年度年會論文集,, 2007/11
12.胡家榮、賴永祥、張淼源, "機械合金法合成四元鎂-鎳基非晶質粉末製備之研究," 中國材料科學學會2007年度年會論文集,, 2007/11
13.胡家榮、張淼源、陳則友, "機械合金法合成三元及四元鎂-銅基非晶質合金之研究," 中國材料科學學會2006年度年會論文集, 2006/11
14.胡家榮、彭彥智、楊上旗, "機械合金法合成三元及四元銅-鈦基非晶質合金之研究," 中國材料科學學會2006年度年會論文集, 2006/11
15.胡家榮、彭彥智、賴昀楷, "機械合金法合成三元鋁基非晶質合金之研究," 中國材料科學學會2006年度年會論文集, 2006/11.
16.施議訓、游元信、李深智、許正勳、胡家榮,, "肉厚大小添加銅及沃斯回火熱處理對縮墨鑄鐵破裂韌性之研究",," 中華民國鑄造學會86年度論文發表會,, 1997/12.
17.游元信、施議訓、李深智、許正勳、胡家榮, "沃斯回火熱處理對灰鑄鐵破裂韌性之研究," 中華民國鑄造學會86年度論文發表會,, 1997/12.
18.張肇家、胡家榮、許正勳、李深智, "不同厚斷面ADI破裂韌性研究," 中華民國鑄造學會論文集,, 1996/12
19.吳兆奇、謝信宏、胡家榮、許正勳、李深智, "ADI量產之恆溫熱處問題," 中華民國鑄造學會論文集, December/1995
20.謝信宏、許正勳、李深智、胡家榮, "沃斯回火延性鑄鐵之破裂韌性研究," 中國機械工程學會論文集, November/1995
21. Shen-Shih Lee and Chia-Jung Hu, "Plasma Nitriding Effects on Fatigure Properties of Aerospace Material",," Pro. of the 2nd R.O.C. Symp. on Fracture Science, pp. 181-186, 1992
 
技術報告 Technical Report
1. 胡家榮, "ADI量產恆溫熱處理問題',," 大同公司建教案研究報告, 1994
 
研究計劃成果報告 Project Report
1.胡家榮, 銅基非晶質合金粉末之合成及特性檢測, 國科會研究報告NSC91-2216-E036-013, Oct. 2003