1. | 許哲維、郭穎、楊智富、陳俊沐、邱垂泓、曾發培, "壓鑄用ADC12鋁合金之硬脆相改良," 鑄造工程學刊 , Vol. 43, No. 3, pp. 15-26, Sep. 2017 |
2. | 陳正剛、許哲維、楊智富、陳俊沐、邱垂泓、曾發培, "改良ADC3鋁合金之微觀組織與機械性質," 鑄造工程學刊, Vol. 42, No. 1 (No. 168), pp.24-34 Mar. 2016 (2016) |
3. | 蔣易霖、陳正剛、楊智富、陳俊沐、邱垂泓、曾發培、楊家棋, "A380鋁合金之成分微調改良," 鑄造工程學刊, Vol.41, No.4, pp.33-42, Dec. 2015 (2015) |
4. | 彭駿傑、鄭仲凱、楊智富、曾發培、陳俊沐、邱垂泓, "微量過渡金屬元素對7050鋁合金再結晶特性之影響," 礦冶, Vol.59, No 3, pp. 97-107, Sep. 2015 |
5. | 蔣易霖、陳正剛、楊智富、陳俊沐、邱垂泓、曾發培、楊熾照, "A380鋁合金節能熱處理," 鑄造工程學刊, Vol.41, No 2 (No.165), pp. 9-15, Jun. 2015 |
6. | 彭駿傑、鄭仲凱、楊智富、曾發培, "鋁合金內添加微量分散相合金元素對強度之提升效果," 金屬熱處理, Vol.124, pp. 43-50, Mar. 2015 |
7. | 謝長宏、蔣易霖、楊智富, "A390鋁合金汽缸高溫鎖附變形研究," 鑄造工程學刊, Vol.41, No 1 (No.164), pp. 7-16, Mar. 2015 |
8. | 吳柏辰、彭駿傑、楊智富、曾發培、陸敬仁、楊家棋, "壓鑄鋁合金之T6處理研究," 鑄造工程學刊, Vol.40, No 3 (No.162), pp. 17-28, Sep. 2014 |
9. | 江 承 祖、鄭 裕 達、楊 智 富, "過共晶鋁矽合金之高溫硬度與耐磨耗性質," 礦冶, Vol.56, No 4, pp. 77-84, Dec. 2012 |
10. | 陳亮宇、徐宇傑、楊智富, "過共晶鋁矽合金之初晶矽細化效果研究," 鑄造工程學刊, Vol.38, No 4 (No.155), pp. 13-18, Dec. 2012 |
11. | 楊智富、王盈璇、江承祖、鄭裕達, "添加合金元素對Al-17%Si合金高溫機械性質之影響 ," 鑄造工程學刊, Vol. 38, No. 1 (No. 152), pp. 21-31, Mar. 2012 |
12. | 楊智富、龔啟良、陳亮宇, "不同之含磷細化劑對過共晶鋁矽合金之初晶矽細化效果比較," 鑄造工程學刊, Vol. 37, No. 2 (149), pp. 1-10, Jun. 2011 |
13. | 曾郁文、王盈琁、江承祖、楊智富, "添加合金元素對鎂鋰合金機械性質與抗蝕性之影響," 礦冶, Vol. 54, No. 2, pp 130-137, Jun. 2010 |
14. | 楊智富、邱六合、葉秉洋, "鋁鈧二元合金與含鈧7050鋁合金之析出研究," 金屬熱處理, Vol. 102, pp31-36, Sep. 2009 |
15. | Chih-Fu Yang, Jiun-Hung Pan, and Te-Hao Lee, "Work Softening and Anneal Hardening Behaviors in Fine-grained Zn-Al Alloys," Journal of Alloys and Compounds, Vol. 468, pp. 230–236, Jan. 2009 SCI |
16. | Chih-Fu Yang, Jiun-Hung Pan, and Ming-Chieh Chuang, "Achieving High Strain Rate Superplasticity via Severe Plastic Deformation," Journal of Materials Science, Vol 43, No. 18, pp.6260-6266, Sep. 2008 SCI |
17. | Shih-Wei Lee, Yu-Liang Chen, Hsiao-Yun Wang, Chih-Fu Yang, and Jien-Wei Yeh, "On mechanical properties and superplasticity of Mg–15Al–1Zn," Materials Science and Engineering A, Vol. 464, pp.76–84, Aug. 2007 SCI |
18. | Yu-Liang Chen, Chih-Fu Yang, Jien-Wei Yeh, and Shui-Shu Hung, "A Novel Process for Fabricating Electrical Contact SnO2/Ag Composites by Reciprocating Extrusion," Metallurgical and Materials Transactions A, Vol. 36A, pp. 2441-2447, Sep. 2005 SCI EI |
19. | J.H. Pan, C.Y. Chen, and C.F. Yang, "The Effects of Microstructure Evolution on the Elevated Temperature Mechanical Properties of an AZ31 Mg Alloy," Journal of Materials Science and Engineering, Vol. 37, No. 2, pp. 57-65, Jun, 2005 |
20. | Liu-Ho Chiu, Chun-Chin Chen, and Chih-Fu Yang, "Improvement of corrosion properties in an Aluminum sprayed AZ31 magnesium alloy by a post hot pressing and anodizing treatment," Surface & Coatings Technology, Vol. 191, Issues 2-3, 21, pp. 181-187, Apr. 2005 SCI EI |
21. | S.W. Lee, H.Y. Wang, Y.L. Chen, J.W. Yeh, and C.F. Yang, "An Mg-Al-Zn Alloy with Very High Specific Strength and Superior High-strain-rate Superplasticity Processed by Reciprocating Extrusion," Advanced Engineering Materials, Vol. 6, Issue 12, pp. 948– 952 (2004) SCI EI |
22. | 楊智富,潘俊宏,林宏穎, "低溫高速超塑性鋅鋁合金之熱處理製程、相變化與超塑性研究," 工程科技通訊, 第七十二期,第41-44頁, Feb, 2004 |
23. | Liu-Ho Chiu, Hsing-An Lin, Chun-Chin Chen, Chih-Fu Yang, Chia-Hua Chang and Jen-Chin Wu, "Effect of Aluminum Coatings on Corrosion Properties of AZ31 Magnesium Alloy," Materials Science Forum, Vol. 419-422, pp. 909-914, Sep. 2003 SCI EI |
24. | Y.C.Hong, C.J. Liao, and C.F. Yang, "The Effects of Alloying Elements on the Microstructures and Mechanical Properties in Mg-Al-X Alloys," Journal of Chinese Foundrymen’s Association, Vol. 28, No.4, pp. 18-27. (2002) |
25. | L.H. Chiu, C.F. Yang, W.C. Hsieh, and A.S. Cheng, "Effect of contact pressure on wear resistance of AISI H13 tool steels with chromium nitride and hard chromium coatings," Surface Coating and Technology, 154, pp. 282-288 (2002) SCI EI |
26. | Chih-Fu Yang, Lung-Chuan Taso, Shiuan-Sheng Wang, and Tung-Han Chuang, "The Ultra-High Rate Superplastic Forming of a Zn-22Al Thin Sheet Material," Z. Metallkd., 92 (2001) 11,pp.1227-1230 (2001) SCI EI |
27. | Liu-Ho Chiu, Chih-Fu Yang, and Ping-Ming Liu, "Wear Resistance of JIS SKD61 Tool Steels with Cr Based Coatings," Surface Engineering, Vol. 16, No. 3, pp. 257-261. (2000) SCI EI |
28. | C.H. Chiu and C.F. Yang, "Effect of the Modifier and Wetting Promoters on Aluminum Matrix Composites," Journal of Chinese Foundrymem’s Association, Vol. 25, No. 4, pp. 22-35. (1999) |
29. | L.H. Chiu, C.F. Yang, and P.M. Liu, "Corrosion Resistance of Three Selected Chromium-Based Coatings on Tool Steel in 1N H2SO4 Solution," J. Chi. Corr. Eng., Vol. 13, No. 1, pp. 13-22. (1999) |
30. | D.G. Yang, S.H. Yang, C.F. Yang, and L.H. Chiu, "The Cast Fusion of A356 Al Alloy to Ferrous Inserts," Journal of Chinese Foundrymen’s Association, Vol. 25, No. 1, pp. 11-18. (1999) |