大同大學教師資料

大同大學教職員資料 (Information of TTU Faculty & Staff)

基本資料 (Basic Info)

姓名：張敏興 (Chang, Min-Hsing) 教授

單位：機械與材料工程學系

電話：221822928

手機：0929026968

email：mhchang@ttu.edu.tw

網址：

學歷 (Education)

國立成功大學機械工程系博士 (1994/9 ~ 1998/6)

國立台灣大學應用力學研究所碩士 (1989/9 ~ 1991/6)

國立成功大學航空太空工程學系學士 (1985/9 ~ 1989/6)

經歷 (Experience)

大同大學機械工程系教授 (2007/2 ~ 今)

大同大學機械工程系兼任教授 (2006/8 ~ 2007/1)

永達技術學院機械工程系教授 (1997/8 ~ 2007/1)

美國加州大學Santa Barbara校區機械工程系訪問學者 (2004/6 ~ 2004/11)

英國杜倫(Durham)大學數學科學系訪問學者 (2003/6 ~ 2003/9)

專長 (Specialty)

燃料電池 Fuel cell

流體動力穩定學 hydrodynamics stability

微流體力學 microfluidic flow

多孔介質流 porous media flow

開授課程 (Course)

機械工程實驗

流體力學 Fluid Mechanics

燃料電池之理論與實務 Introduction to fuel cell technology

熱力學 Thermodynamics

獎勵 (Award)

2006年優秀青年工程師獎 (中國機械工程學會高雄市分會 2006-01-01)

2000年甲等研究獎勵 (國科會 2000-01-01)

1999年甲等研究獎勵 (國科會 1999-01-01)

1998年甲等研究獎勵 (國科會 1998-01-01)

服務 (Service)

1.	熱工實驗室管理 (2007-02-01 ~ 今)
2.	中國機械工程學會永久會員 (2000-12-01 ~ 今)

學術研究計畫(研4)

1.	應用離心靜電紡絲法製作多孔鉑鐵合金奈米纖維在質子交換膜燃料電池觸媒電極應用研究，2022/8/1 ~ 2023/7/31
2.	應用靜電紡絲法製作鉑鎳奈米纖維在質子交換膜燃料電池陰極觸媒層反應性能研究，2021/8/1 ~ 2022/7/31
3.	應用離心靜電紡絲法製作鉑金奈米纖維在低溫燃料電池觸媒電極應用研究，2020/8/1 ~ 2021/7/31
4.	應用離心靜電紡絲技術製作鉑鈷奈米纖維在質子交換膜燃料電池陰極觸媒氧氣還原反應性能研究，2019/8/1 ~ 2020/7/31
5.	"水平壓力梯度對奈米流體層熱對流穩定性分析研究 "，2018/8/1 ~ 2019/7/31
6.	應用離心靜電紡絲技術製作鉑鈀雙金屬奈米線在質子交換膜燃料電池應用研究，2018/8/1 ~ 2019/7/31
7.	應用靜電紡絲技術製作鉑鈀雙金屬奈米線在質子交換膜燃料電池應用研究，2017/8/1 ~ 2018/7/31
8.	旋轉靜電紡絲法製造白金奈米纖維研究及對質子交換膜燃料電池性能影響測試分析，科技部一般型研究計劃 2016/8/1 ~ 2017/7/31
9.	應用電紡白金奈米纖維製作複合觸媒電極對質子交換膜燃料電池性能影響測試分析，科技部一般型研究計劃 2014/8/1 ~ 2015/7/31
10.	電紡聚丙烯腈奈米纖維製備碳纖維與白金觸媒載體應用於質子交換膜燃料電池性能測試分析，國科會一般型研究計畫 2013/8/1 ~ 2014/7/31
11.	平行板間具導電梯度流體在電場與溫度梯度作用下之穩定特性分析，國科會一般型研究計劃 2010/8/1 ~ 2011/7/31
12.	氣體擴散層雙側微孔層塗佈對質子交換膜燃料電池性能影響理論分析與實驗研究(2/2)，國科會一般型研究計畫 2010/8/1 ~ 2011/7/31
13.	燃料電池流道碳板製程參數變化對物理性質影響測試分析，國科會產學合作計畫 2009/11/1 ~ 2010/10/31
14.	氣體擴散層雙側微孔層塗佈對質子交換膜燃料電池性能影響理論分析與實驗研究(1/2)，國科會一般型研究計畫 2009/8/1 ~ 2010/7/31
15.	高效能微型甲醇重組器研究，國科會一般型研究計畫 2007/8/1 ~ 2008/7/31
16.	質子交換膜燃料電池雙極板與氣體擴散層界面接觸阻抗特性研究，國科會一般型研究計畫 2006/12/1 ~ 2007/12/31
17.	質子交換膜燃料電池陰極氣體擴散層兩相流特性分析，國科會一般型研究計畫 2006/8/1 ~ 2007/7/31
18.	焦耳熱效應對交流電場作用下微通道內電滲透流穩定性影響分析，國科會一般型研究計畫 2005/8/1 ~ 2006/7/31
19.	輻射熱吸收特性對單向合金固化系統對流穩定性影響分析，國科會一般型研究計畫 2004/8/1 ~ 2005/7/31
20.	單向合金固化傾斜旋轉流場對流不穩定性分析，國科會一般型研究計劃 2003/8/1 ~ 2004/7/31
21.	固態氧化物型燃料電池氣體通道熱傳與質傳特性分析，國科會一般型研究計畫 2002/12/1 ~ 2003/10/31
22.	單向合金固化結晶層與固體層邊界條件對流場不穩定機制影響分析，國科會一般型研究計畫 2002/8/1 ~ 2003/7/31
23.	單向固化可變黏度溶液傾斜旋轉引致流場分析，國科會一般型研究計畫 2001/8/1 ~ 2002/7/31
24.	微極流體在共軸旋轉圓柱中穩定性分析，國科會一般型研究計畫 2000/8/1 ~ 2001/7/31
25.	鐵磁流體在具軸向磁場之共軸旋轉圓柱中穩定性分析，國科會個別型計劃 1999/8/1 ~ 2000/7/31
26.	黏性流體在具軸向壓力梯度之共軸旋轉圓柱中穩定性分析，國科會個別型計劃 1998/8/1 ~ 1999/7/31

產學合作計畫(研9)

1.	甲醇型重組器蒸發盤管應力模擬及改良作業，2016/1/1 ~ 2016/5/31
2.	氣體擴散層雙側微孔層塗佈對PEM燃料電池低空氣濕度操作性能影響測試分析，2011/5/18 ~ 2011/11/30
3.	空氣濕度對PEM燃料電池微孔層最佳製作參數影響測試分析，2010/7/6 ~ 2011/3/31
4.	組裝壓力對PEM燃料電池氣體擴散層最佳PTFE含量影響測試分析，2009/8/13 ~ 2010/3/31
5.	組裝壓力對質子交換膜燃料電池氣體擴散層與接觸阻抗性能影響測試分析，2008/4/1 ~ 2009/4/1
6.	無薄膜微型燃料電池分析與設計，2006/3/1 ~ 2007/3/1

期刊論文 (Journal Paper)

1.	A. C. Ruo, W. M. Yan, Min-Hsing Chang, T. F. Yang(2023). Thermal instability of a horizontal nanofluid layer in a porous medium with high porosity. Journal of Mechanics, 38, 643-658. SCIE(SCI)
2.	Bo-Han Chen, Min-Hsing Chang, Chung-Yu Liao(2022). Fabrication of bimetallic PtPd nanowire electrocatalysts by centrifugal electrospinning method for proton exchange membrane fuel cell. International Journal of Hydrogen Energy, 47, 37531-3754. SCIE(SCI)
3.	Min-Hsing Chang, An-Cheng Ruo(2022). Rayleigh–Bénard instability in nanofluids: effect of gravity settling. Journal of Fluid Mechanics, 950, A37. SCIE(SCI)
4.	Wei-Hsin Chen, Yi-Wei Li, Min-Hsing Chang, Chih-Che Chueh, Veeramuthu Ashokkuma, Lip Huat Saw(2022). Operation and Multi-Objective Design Optimization of a Plate Heat Exchanger with Zigzag Flow Channel Geometry. Energies, 15, 8205. SCIE(SCI)
5.	Y. F. Chang, C. Y. Wu, Min-Hsing Chang(2022). Fabrication of platinum-cobalt nanowires by centrifugal electrospinning as oxygen reduction catalyst for PEMFC. International Journal of Hydrogen Energy, (https://doi.org/10.1). SCIE(SCI)
6.	W. H. Chen, J. S. Wang, Min-Hsing Chang, A. T. Hoang, S. S. Lam, E. E. Kwon, V. Ashokkumar(2022). Optimization of a vertical axis wind turbine with a deflector under unsteady wind conditions via Taguchi and neural network applications. Energy Conversion and Management, (254), 115209. SCIE(SCI)
7.	W. H. Chen, Y. W. Li, C. C. Lin, M. H. Chang, A. Saravanakumar, L. H. Saw(2022). Multi-objective optimization design for pressure uniformity in a proton exchange membrane fuel cell stack. International Journal of Energy Research, (doi:10.1002/ er.8566), 1-17. SCIE(SCI)
8.	A. C. Ruo, W. M. Yan, Min-Hsing Chang(2021). The onset of natural convection in a horizontal nanofluid layer heated from below. Heat Transfer, (50), 7764-7783. SCIE(SCI)
9.	Wei-Hsin Chen, Zong-Lin Tsai, Min-Hsing Chang, Siming You, Pei-Chi Kuo(2021). Geometry optimization and pressure analysis of a proton exchange membrane fuel cell stack. International Journal o f Hydrogen Energy, (46), 16717-1673. SCIE(SCI)
10.	Chao-Yang Huang, Min-Hsing Chang(2021). Fabrication of platinum nanowires by centrifugal electrospinning method for proton exchange membrane fuel cell. International Journal of Energy Research, (45), 12968-1297. SCIE(SCI)
11.	W. H. Chen, J . S. Wang, Min-Hsing Chang, J. K. Mutuku, A. T. Hoang(2021). Efficiency improvement of a vertical axis wind turbine using a deflector optimized by Taguchi approach with modified additive method. Energy Conversion and Management, (245), 114609. SCIE(SCI)
12.	Wei-Hsin Chen, Zong-Lin Tsai, Min-Hsing Chang, Tzu-Hsuan Hsu, Pei-Chi Kuo(2020). Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells. International Journal of Energy Research, 2021(https://doi.org/10.1), 1-15. SCIE(SCI)
13.	Ting-Yueh Chang, Falin Chen, Min-Hsing Chang(2018). Three-dimensional stability analysis for a salt-finger convecting layer. Journal of Fluid Mechanics, 841, 636-653.
14.	Jeng-Rung Jiang, Falin Chen, Min-Hsing Chang(2016). Application of Infinitesimal Fluid Element Approach to Analyze Contact Angle with Surfactant Effect. Journal of Multidisciplinary Engineering Science and Technology, 3(8), 5466-5470.
15.	Jeng-Rung Jiang, Falin Chen, Min-Hsing Chang(2016). Young’s Equation for Non-planar Surfaces. INTERNATIONAL JOURNAL OF MECHANICS, 10, 326-328.
16.	Che-Chia Fan, Min-Hsing Chang(2016). Improving proton exchange membrane fuel cell performance with carbon nanotubes as the material of cathode microporous layer. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 40, 181-188. SCIE(SCI)
17.	Y. G. Su, F. Chen, C. Y. Wu, Min-Hsing Chang(2016). Effect of surface roughness of chill wheel on ribbon formation in theplanar flow casting process. Journal of Materials Processing Technology, 229, 609-613. SCIE(SCI)
18.	Yu-Guang SU, Falin CHEN, Chung-Yung WU, Min-Hsing CHANG, Chih-Ang CHUNG(2015). Effects of Manufacturing Parameters in Planar Flow Casting Process on Ribbon Formation and Puddle Evolution of Fe–Si–B Alloy. ISIJ International, 55(11), 2383–2390. SCIE(SCI)
19.	Sheng-Yan Lin, Min-Hsing Chang(2015). Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance. International Journal of Hydrogen Energy, 40, 7879 - 788. SCIE(SCI)
20.	Guan-Min Huang, Min-Hsing Chang(2014). Effect of Gas Diffusion Layer With Double-Side Microporous Layer Coating on Proton Exchange Membrane Fuel Cell Performance Under Different Air Inlet Relative Humidity. International Journal of Electrochemical Science, 9, 7819 - 783. SCIE(SCI)
21.	YU-GUANG SU, FALIN CHEN, CHIA-MING CHANG, CHUNG-YUNG WU, MIN-HSING CHANG, C.A.CHUNG(2014). Tuning the Planar-Flow Melt-Spinning Process Subject to Operability Conditions. JOM, 66(7), 1277-1286. SCIE(SCI)
22.	Ming-Tung Sung, Min-Hsing Chang, Ming-Hua Ho(2013). Investigation of cathode electrocatalysts composed of electrospun Pt nanowires and Pt/C for proton exchange membrane fuel cells. Journal of Power Sources, 249, 320-326. SCIE(SCI)
23.	Hao-Ming Chang, Min-Hsing Chang(2013). Effect of Gas Diffusion Layer With Double-Side Microporous Layer Coating on Polymer Electrolyte Membrane Fuel Cell Performance. ASME Journal of Fuel Cell Science and Technology, 10, 021005. SCIE(SCI)
24.	Chun-Ting Liu, Min-Hsing Chang(2013). Effects of Microporous Layer on PBI-based Proton Exchange Membrane Fuel Cell Performance. International Journal of Electrochemical Science, 8, 3687 - 369. SCIE(SCI)
25.	Hong-Hua Chen, Min-Hsing Chang(2013). Effect of cathode microporous layer composition on proton exchange membrane fuel cell performance under different air inlet relative humidity. Journal of Power Sources, 232, 306-309. SCIE(SCI)
26.	Cheng-Cheng Chiang, Min-Hsing Chang(2012). Characterization of a Membraneless Microfluidic Hydrogen/Air Fuel Cell. Journal of the Chinese Society of Mechanical Engineers, 33(5), 427~433. EI
27.	An-Cheng Ruo, Kuan-Hung Chen, Min-Hsing Chang, Falin Chen(2012). Instability of a charged non-Newtonian liquid jet. PHYSICAL REVIEW E, 85, 016306. SCIE(SCI)
28.	A. C. Ruo, F. Chen, C. A. Chung, M. H. Chang(2011). Three-dimensional response of unrelaxed tension to instability of viscoelastic jets. J. Fluid Mechanics, 682(2011), 558–576. SCIE(SCI)
29.	M. H. Chang, A. C. Ruo, F. Chen, S. T. Chang(2011). The effect of Joule-heating-induced buoyancy on the electrohydrodynamic instability in a fluid layer with electrical conductivity gradient. Int. J. Heat and Mass Transfer, 54(2011), 3837–3845. SCIE(SCI)
30.	H. M. Chang, C. W. Lin, M. H. Chang, H. R. Shiu, W. C. Chang, F. H. Tsau(2011). Optimization of polytetrafluoroethylene content in cathode gas diffusion layer by the evaluation of compression effect on the performance of a proton exchange membrane fuel cell. Journal of Power Sources, 196, 3773-3780. SCIE(SCI)
31.	C. Y. Hsueh, H. S. Chu, W. M. Yan, C. H. Chen, M. H. Chang(2010). Numerical study of heat and mass transfer in the plate methanol steam micro-reformer channels. Applied Thermal Engineering, 30, 1426-1437. SCIE(SCI)
32.	A. C. Ruo, M. H. Chang, F. Chen(2010). Electrohydrodynamic instability of a charged liquid jet in the presenceof an axial magnetic field. Physics of Fluids, 22, 044102. SCIE(SCI)
33.	An-Cheng Ruo, Min-Hsing Chang, Falin Chen(2010). Effect of rotation on the electrohydrodynamic instability of a fluid layer with an electrical conductivity gradient. Physics of Fluids, 22, 024102. SCIE(SCI)
34.	Falin Chen, Min-Hsing Chang, Chih-Yi Kuo, Ching-Yi Hsueh, We-Mon Yan(2009). Analysis of a Plate-Type Microreformer for Methanol Steam Reforming Reaction. Energy & Fuels, 23, 5092- 5098. SCIE(SCI)
35.	MIN-HSING CHANG, AN-CHENG RUO, FALIN CHEN(2009). Electrohydrodynamic instability in a horizontal fluid layer with electrical conductivity gradient subject to a weak shear flow. J. Fluid Mech., 634, 191–215. SCIE(SCI)
36.	H. C. Weng, C. K. Chen, M. H. Chang(2009). Stability of micropolar fluid flow between concentric rotating cylinders. J. Fluid Mech., 631, 343–362. SCIE(SCI)
37.	Li-Ming Chu, Min-Hsing Chang, Jiann-Lin Chen, Jin-Yuan Lai(2009). Simulation and experimental measurement of flow field within an air cleaner of all-terrain vehicle. Journal of the Chinese Society of Mechanical Engineers, 30(2), 143~150. SCIE(SCI)
38.	An-Cheng Ruo, Falin Chen, Min-Hsing Chang(2009). Linear instability of compound jets with nonaxisymmetric disturbances. PHYSICS OF FLUIDS, 21, 012101. SCIE(SCI)
39.	An-Cheng Ruo, Min-Hsing Chang, Falin Chen(2008). On the nonaxisymmetric instability of round liquid jets. Physics of Fluids, 20, 062105. SCIE(SCI)
40.	Li-Ming Chu, Min-Hsing Chang, Hsiang-Chen Hsu, Wen-Tung Chien, Chien-Heng Liu(2008). Simulation and Experimental Measurement of Flow Field within Four-Stroke motorcycle engines. Journal of the Chinese Society of Mechanical Engineers, 29(2), 149~ 158. EI
41.	Falin Chen, Min-Hsing Chang, Hung-Yi Lin(2008). Analysis of a novel MEMS-based design of micro-direct methanol fuel cell. Journal of Power Sources, 178, 125-131. SCIE(SCI)
42.	Chang, Min-Hsing(2007). Analysis of membraneless microfuel cell using decomposition of hydrogen peroxide in a Y-shaped microchannel. Electrochimica Acta, 52, 7270-7277. SCIE(SCI)
43.	Chang, Min-Hsing(2007). A novel design of air cleaner for motorcycles. Jorunal of the Chinese Society of Mechanical Engineers, 28, 429-435. EI
44.	Chen F., Chang M. H., C. F.(2007). Analysis of water transport in a five-layer model of PEMFC. Journal of Power Sources, 164, 649-658. SCIE(SCI)
45.	Chang M. H., Chen F., Teng H. S.(2006). Effects of two-phase transport in the cathode gas diffusion layer on the performance of a PEMFC. J. Power Sources, 160, 268-276. SCIE(SCI)
46.	Chang M. H., Chen F., B.(2006). Stability of plane-Poiseuille flow in a fluid overlying a porous layer. J. Fluid Mechanics, 564, 287-303. SCIE(SCI)
47.	Chang M. H., Chen F., N. S.(2006). Analysis of membaneless fuel cell using laminar flow in a Y-shaped microfluidic channel. J. Power Sources, 59, 810-816. SCIE(SCI)
48.	Tsai C. R., Chen F., Ruo A. C., Chang M. H.(2006). An analytical solution for transport of oxygen in cathode gas diffusion layer of PEMFC. J. Power Sources, 160, 50-56. SCIE(SCI)
49.	朱曉明、張敏興、楊榮華、賴晉圓（2006）。二行程引擎汽缸內流場數值模擬與量測。永達學報，7(1)，1-10。SCIE(SCI)
50.	Chang M. H.(2006). Thermal convection in superposed fluid and porous layers subjected to a plane Poiseuille flow. Physics of Fluids, 18, 035104. SCIE(SCI)
51.	Chang M. H.(2005). Thermal convection in superposed fluid and porous layers subjected to a horizontal plane Couette flow. Physics of Fluids, 17, 064106. SCIE(SCI)
52.	Chang M. H., G. M. Homsy(2005). Effects of Joule heating on the stability of time-modulated electroosmotic flow. Physics of Fluids, 17, 074107. SCIE(SCI)
53.	Chang M. H. M. H.(2005). A decomposition solution for fins with temperature dependent surface heat flux. International Journal of Heat and Mass Transfer, 48, 1819-1824. SCIE(SCI)
54.	Chang M. H.(2004). Stability of convection induced by selective absorption of radiation in a fluid overlying a porous layer. Physics of Fluids, 16, 3690-3698. SCIE(SCI)
55.	Chang M. H.(2003). Hydrodynamic stability of Taylor-Dean flow between rotating porous cylinders with radial flow. Physics of Fluids, 15, 1178-1188. SCIE(SCI)
56.	Chang M. H., Chen C. K., H. C.(2003). Stability of ferrofluid flow between concentric rotating cylinders with an axial magnetic field. International Journal of Engineering Science, 41, 103-121. SCIE(SCI)
57.	Chang M. H., C. K.(2003). Current-induced instabilities of hydromagnetic flow in a small gap between rotating conducting cylinders. Acta Mechanica, 162, 125-141. SCIE(SCI)
58.	蘇育漢、張敏興（2003）。汽油噴射引擎感知器訊號對噴油時間的影響。永達學報，4(2)。
59.	Chang M. H., Lin J. H., C. K.(2001). The inverse estimation of local heat transfer coefficient in a vertical plate fin with its base subjected to periodically oscillated temperature. Numerical heat transfer, Part A, 40, 253-271. SCIE(SCI)
60.	Chang M. H.(2001). Flows induced by inclined rotation in directional solidification of variable-viscosity solutions. J. Crystal Growth, 233, 881-896. SCIE(SCI)
61.	Chang M. H., Chen C. K.(1999). Hydromagnetic stability of current-induced flow between concentric cylinders. Trans. ASME, J. Fluids Engineering, 121, 548-554. SCIE(SCI)
62.	Chang M. H.(1998). Hydromagnetic stability of current-induced flow in a small gap between concentric rotating cylinders. Proc. R. Soc. Lond., A454, 1857-1873. SCIE(SCI)
63.	Chen C. K., Chang M. H.(1998). Stability of Hydromagnetic dissipative Couette flow with non-axisymmetric disturbance. J. Fluid Mechanics., 366, 135-158. SCIE(SCI)
64.	Chen F., Chang M. H.(1992). Stability of Taylor-Dean flow in a small gap between rotating cylinders. J. Fluid Mechanics, 243, 443-455. SCIE(SCI)

研討會論文 (Conference Paper)

1.	何冠樺、張敏興（2021）。應用旋轉靜電紡絲法製作氧化銅奈米纖維技術研究。第十六屆全國氫能與燃料電池學術研討會（頁 P-027）。R.O.C。
2.	謝睿宇、王明興、張敏興（2021）。旋轉靜電紡絲法製造鉑釕奈米纖維技術研究與燃料電池應用性能測試分析。台灣機電工程國際學會第六屆全國學術研討會（頁 ISME091）。R.O.C。
3.	吳鎮宇、張敏興（2020）。應用旋轉靜電紡絲法製造鉑鈷合金奈米纖維技術研究與性能測試分析。中國機械工程學會第三十七屆全國學術研討會（頁 #111）。R.O.C。
4.	陳柏翰、張敏興（2019）。應用旋轉靜電紡絲法製造鉑鈀奈米纖維技術研究與性能測試分析。中國機械工程學會第36屆全國學術研討會R.O.C。
5.	Guan-Hua He, Min-Hsing Chang(2019). Fabrication of CuO Nanowires by the Electro-forcespinning Method. The International Conference on Sustainable Energy and Green Technology (SEGT) 2019. Thailand.
6.	Jain-Yu Chen, Min-Hsing Chang(2019). Fabrication of Palladium Nanowires by Centrifugal Electrospinning Method as Electrocatalyst for Low . 25th Topical Meeting of the International Society of Electrochemistry: New electrochemical processes. Spain.
7.	Min-Hsing Chang(2019). A revised model for the effect of thermophoresis on the onset of convection in a horizontal nanoflui. 8th International Symposium on Bifurcations and Instabilities in Fluid Dynamics. Ireland.
8.	Huang-Chun Yu, Min-Hsing Chang(2014). Preparation of Electrospun Polyacrylonitrile-based Carbon Nanofibers as Pt Catalyst Support and Its Application in a PEM Fuel Cell. 65th Annual Meeting of the International Society of Electrochemistry. Switzerland.
9.	C. Y. Chuang, Min-Hsing Chang(2014). Optimal synthesizing ratio of Pt/CNT and Nafion content in the cathode catalyst layer of a PEM fuel cell. 2014 Energy Material Nanotechnology (EMN) East Meeting. Mainland China.
10.	Sheng-Yan Lin, Min-Hsing Chang(2014). EFFECT OF MICROPOROUS LAYER COMPOSED OF CARBON NANOTUBE AND ACETYLENE BLACK ON POLYMER ELECTROLYTE MEMBRANE FUEL CELL PERFORMANCE. 13th International Conference on Clean Energy. Turkey.
11.	Y. H. Hung, Min-Hsing Chang(2013). Application of carbon nanotubes as Pt support in cathode catalyst layer and performance analysis for a proton exchange membrane fuel cell. 3rd International Colloids Conference: Colloids & Energy. Mainland China.
12.	H. M. Chang, Min-Hsing Chang(2012). Effect of gas diffusion layer with double-faced microporous layer coating on the performance of a PEM fuel cell. 4th International Conference on Applied Energy. Mainland China.
13.	Hong-Hua Chen, Min-Hsing Chang(2012). Effects of composition in cathode microporous layer on the performance of a proton exchange membrane fuel cell under different air inlet relative humidity. 19th World Hydrogen Energy Conference. Canada.
14.	G. M. Huang, Min-Hsing Chang(2012). Effects of gas diffusion layer with double-faced microporous layer coating on the performance of a PEM fuel cell under different air inlet relative humidity. 63th Annual Meeting of the International Society of Electrochemistry. Czech Republic.
15.	H. M. Chang, M. H. Chang(2011). Effects of Assembly Pressure on the Gas Diffusion Layer and Performance of a PEM Fuel Cell. 2011 International Conference on Power and Energy Engineering (ICPEE 2011). Thailand.
16.	A. C. Ruo, M. H. Chang, F. Chen(2010). Electrohydrodynamic instability of a charged liquid jet: effect of non-equipotential electrode surface. 7th International conference on heat transfer, fluid mechanics and thermodynamics. Turkey.
17.	M. H. Chang, C. T. Liu, H. M. Chang(2010). Effect of PTFE Content and Carbon Loading in Micro Porous Layer on the Performance of a PBI-based High Temperature PEM Fuel Cell. 61th Annual Meeting of the International Society of Electrochemistry. France.
18.	C. C. Chiang, M. H. Chang, F. Chen(2010). A membraneless hydrogen/air fuel cell with a liquid electrolyte. 18th World Hydrogen Energy Conference. Germany.
19.	C. Y. Kuo, M. H. Chang, F. Chen(2009). Analysis of a plate-type micro reformer for methanol steam reforming reaction. HYPOTHESIS VIII (Hydrogen – POwer THeoretical and Engineering Solutions International Symposium). Portugal.
20.	M. H. Chang, C. L. Chen, F. Chen(2009). Two Dimensional Modeling of a PBI-based High Temperature PEMFC Using a Two-phase Model. 60th Annual Meeting of the International Society of Electrochemistry. Mainland China.
21.	Min-Hsing Chang, An-Cheng Ruo, Falin Chen, Zhi-Wen Xiao(2008). Electrohydrodynamic instability in a horizontal Poiseuille flow with an electrical conductivity gradient. The 22nd International Congress of Theoretical and Applied Mechanics. Austria.
22.	Falin Chen, Min-Hsing Chang, Jung-Shun Tsai, Ping-Tso Hsieh(2008). Two-phase transport in the cathode of PEM fuel cell with a porosity-graded gas diffusion layer. 17th World Hydrogen Energy Conference, Brisbane, Australia. Australia.
23.	M. H. Chang, Falin Chen, H. I. Lin(2007). Analysis of a novel MEMS-based design of micro direct methanol fuel cell. 58th Annual Meeting of the International Society of Electrochemistry. Canada.
24.	M. H. Chang, Falin Chen, J. M. Wu(2007). Analysis of Air-Breathing Membraneless Micro Fuel Cell Using Laminar Flow in a Planar Microchannel. Hydrogen & Fuel Cells 2007 Conference and Trade Show. Canada.
25.	M. H. Chang, Falin Chen(2006). Analysis of membraneless micro fuel cell using decomposition of hydrogen peroxide in a Y-shaped microchannel. 57th Annual Meeting of the International Society of Electrochemistry. United States of America.
26.	M. H. Chang, Falin Chen(2006). Transport of reactants in a planar membraneless microchannel fuel cell. 2nd International Conference on Transport Phenomena in Micro and Nanodevices, Barga, Italy. Italy.
27.	M. H. Chang(2005). Stability of convection in a fluid overlying a porous layer subjected to a horizontal plane Couette flow. 13th International Conference on Waves and Stability in Continuous Media, Italy, Catania. Italy.
28.	M. H. Chang(2005). Convective instability induced by selective absorption of radiation in superposed fluid and porous layers. 4th International Conference on Computational Heat and Mass Transfer, Paris, France. France.
29.	M. H. Chang(2002). Convective flows in directional solidification under inclined rotation. The 1st international conference on heat transfer, fluid mechanics, and thermodynamics, Kruger Park,. South Africa.
30.	M. H. Chang(2002). Double-diffusive convection induced by rocking motion in directional solidification. The 9th Asian Congress of Fluid Mechanics, Tehran, Iran. Iran.
31.	M. H. Chang(1998). Hydromagnetic stability of current- induced flow in a small gap between rotating conducting cylinders. Proceedings of the 7th international symposium on flow modeling and turbulence measurements, Tainan. R.O.C.